800-827-1333 or 805-683-1196 info@candmtopline.com

Free Shipping! No Tax Outside of CA!

Deburring Tools & Accessories

Industrial Lifting Magnet

The Magnetool Multilift provides an effective and rapid means of lifting small iron and steel parts from stock bins, boxes, kegs, tables, or floor. Smooth, uninterrupted side surfaces allow fast, easy burrowing into loose materials. A fingertip pull on the release bar drops the load. Lower case made of nylon.

  • Pickup capacity in lbs:  4-5
  • Width: 3-1/8
  • Length: 4-3/4
  • Overall height 9-1/4
  • Weight in lbs: 4-1/2

$88.00

Add to cart

MADE IN THE USA

Shipping included anywhere in the 48 states!

Little Giant Pump

Featuring an oil-filled motor housing with a radial lip seal on the motor shaft. They have an exceptional life expectancy because the oil serves as a continuous lubricant for all moving parts and the shaft seal. This non-toxic dielectric oil, often paired with an aluminum, cast iron or plastic housing, also helps dissipate the heat build-up found in a continuously running pump. This pump will work with oil-based solvent or water and compound.

  • Horsepower:  1/150
  • Flow: 205 GPH @ 1′ head
  • Voltage: 115
  • Outlet: 1/4″ NPT
  • Cord Length: 6′ with 115 plug
  • Weight in lbs: 4

$94.00

Add to cart

MADE IN THE USA

Shipping included anywhere in the 48 states!

Dividers for 300DB & 600DB Vibratory Finishing Tanks

Available for both our 300 & 600 machines.
 

  • Divide tank so that you can run two different types of media and deburr aluminum and steel at the same time.
  • Compartmentalize machine to reduce part impingement on soft material.
  • Divide tank so that very small parts can be run with small media in one section while utilizing the reminder of the tank for other parts.
  • Easy to install. Economically priced. Always available.

Divider for 300DB

(3 cu ft)

$50.00

Add to cart

Divider for 600DB

(6.5 cu ft)

$64.00

Add to cart

V-104 Wall or Base Mounted Timer

Works for both our 300DB vibratory finishing tank machine and our TLV 25, 50 & 75 vibratory bowls.  It also works well with any deburring machine with a 1SP single phase motor or smaller.

  • Powder coated metal box.
  • 6-hour timer with two 120-volt outlets, one for the machine and one for the fluid system.
  • Separate switch to turn the pump on or off.
  • Timer with hold feature to leave the machine on without being timed.
  • Weight: 5 lbs. Ships via UPS.

$145.00

Add to cart

MADE IN THE USA

Shipping included anywhere in the 48 states!

Separating Screens - Set of Five

Screens for manually separating parts from media. They are also useful for separating undersize media from useable media. Made of high impact polymer with integral screen, one-piece molding eliminates problems with parts and media sticking at the joints of two-piece screens. Screens nest for storage.

  • 11 ½” Diameter x 2 ½” Deep

$149.00

Add to cart

MADE IN THE USA

Shipping included anywhere in the 48 states!

7 Gallon Bucket

Cropped Pail Black BackgroundThe 7 gallon bucket is used with all sizes of the vibratory bowls & the 300DB to circulate the compound mixture through the machine with our submersible pump. This pail is the perfect height to hold the submersible pump on the bracket & to reduce splashing or loss of media when doing a clean out.

  • Height: 20”
  • Diameter: 12”
  • Weight in lbs: 5

$15.00

Add to cart

10 Gallon Bucket

The 10 gallon bucket is used along with the larger 600DB machine to circulate the compound mixture through the machine with our submersible pump. It is durable and made for the bigger jobs. The size is idea for this machine. The right tool for the important part of the deburring process that water and compound solution plays.

  • Height: 17”
  • Diameter: 15 ½”
  • Weight in lbs: 7

$32.00

Add to cart

Sound Abatement Covers

Available for both our 300 & 600 machines.

Made with durable poly plastic material. Custom sized to fit each machine. Easy to use. Comes with rust proof stainless steel bolt for attaching to machine.

Cover for 300DB Machine

  • Width: 18”
  • Length: 33 ½”
  • Thickness: 3/16”
  • Weight in lbs: 5

Cover for 600DB Machine

  • Width: 24”
  • Length: 38”
  • Thickness: 3/16”
  • Weight in lbs: 9

Cover for 300DB

(3 cu ft)

$59.00

Add to cart

Cover for 600DB

(6.5 cu ft)

$69.00

Add to cart