• Gloss white, high quality reinforced fiberglass base.
• Wet or dry tumbling. Made for industrial use.
• Solid steel bars, cast in urethane and precision ground.
• Available in 110v @ 60 Hz or for export 220v @ 50 Hz.
• Available in two speed or variable speed.

• Great for deburring small parts. Easy to separate.
• Do steel ball burnishing at a very low cost.
• Can run different size barrels at the same time.
• We can build any of these machines with special bar spacing to accommodate your barrels at no extra charge.

2-Bar 2-Speed Tumbler Base

Dimensions:  Length 36" x Width 19" x Height 13"
Bar Length:  24"
Inside Bar Spacing:  7.5"
Motor:  1/3HP - RPM 1725/1140

Available in 110v @ 60Hz or 220v @ 50Hz

The bar diameter is one inch. It turns at 467 RPM on low and 707 RPM on high. See barrel chart below for the exact RPM each barrel would rotate on HI or LOW speed.

$899.00
(2 speed)

or

 $1551.00
(variable speed)

3-Bar 2-Speed Tumbler Base

Dimensions:  Length 36" x Width 19" x Height 13"
Bar Length:  24"
Inside Bar Spacing:  3.5"
Motor:  1/3HP - RPM 1725/1140

Available in 110v @ 60Hz or 220v @ 50Hz

The bar diameter is one inch. It turns at 467 RPM on low and 707 RPM on high. See barrel chart below for the exact RPM each barrel would rotate on HI or LOW speed.

$899.00
(2 speed)

or

 $1551.00
(variable speed)

Mini-Max 2-Bar 2-Speed Tumbler Base

Dimensions:  Length 23" x Width 16" x Height 13"
Bar Length:  9.25"
Inside Bar Spacing:  4.5"
Motor:  1/3HP - RPM 1725/1140

Available in 110v @ 60Hz or 220v @ 50Hz

The bar diameter is one inch. It turns at 467 RPM on low and 707 RPM on high. See barrel chart below for the exact RPM each barrel would rotate on HI or LOW speed.

$689.00
(2 speed)

or

 $1299.00
(variable speed)

Rotary Tumbler Barrel Series

All of our rotary tumbler barrels include the following features:

• made from high density polyethylene(HDPE) plastic
• covers are made of stainless steel, with neoprene expansion plugs
• positive lock and seal allowing easy access