|
   
C&M Topline Inc.
5945 Daley Street
Goleta CA 93117
Phone 800-827-1333
or 805-683-1196
Fax 805-683-4468
|
 Check Out/View Cart
Deburring Tools & Accessories
Shipping included anywhere in the 48 states
Industrial Lifting Magnet
The Magnetool Multilift provides an effective and rapid means of
lifting small iron and steel parts from stock bins, boxes, kegs,
tables, or floor. Smooth, uninterrupted side surfaces allow fast,
easy burrowing into loose materials. A fingertip pull on the release
bar drops the load. Lower case made of nylon.
- Pickup capacity in lbs: 4-5
- Width: 3-1/8
- Length: 4-3/4
- Overall height 9-1/4
- Weight in lbs: 4-1/2
|
$74.00
Shipping included
|
MADE IN THE USA
 |
Little Giant Pump
Featuring an oil-filled motor housing with a radial lip seal on
the motor shaft. They have an exceptional life expectancy because
the oil serves as a continuous lubricant for all moving parts and
the shaft seal. This non-toxic dielectric oil, often paired with an
aluminum, cast iron or plastic housing, also helps dissipate the
heat build-up found in a continuously running pump. This pump will
work with oil-based solvent or water and compound.
- Horsepower: 1/150
- Flow: 205 GPH @ 1' head
- Voltage: 115
- Outlet: 1/4" NPT
- Cord Length: 6' with 115 plug
- Weight in lbs: 4
|
$85.00
Shipping included
|
MADE IN THE USA
 |
Dividers
Available for both our 300DB & 600DB vibratory finishing tank machines.
- Divide tank so that you can run two different types of media
and deburr aluminum and steel at the same time.
- Compartmentalize machine to reduce part impingement on
soft material.
- Divide tank so that very small parts can be run with small
media in one section while utilizing the reminder of the tank
for other parts.
- Easy to install. Economically priced. Always available.
|
Divider for 300DB
(3 cu ft)
$48.00
Shipping included
Divider for 600DB
(6.5 cu ft)
$59.00
Shipping included
|
MADE IN THE USA
 |
V-104 Wall or Base Mounted Timer
Works for both our 300DB vibratory finishing tank machine and our
TLV 25, 50 & 75 vibratory bowls. It also works well with any
deburring machine with a 1SP single phase motor or smaller.
- Powder coated metal box.
- 12-hour timer with two 120-volt outlets, one for the machine
and one for the fluid system.
- Separate switch to turn the pump on or off.
- Timer with hold feature to leave the machine on
without being timed.
- Weight: 5 lbs. Ships via UPS.
|
$139.00
|
MADE IN THE USA
 |
|
